Highlighted Features

100% Solid Wood Cabinet

The Angle is made from Pennsylvania solid lumber chosen for its beauty, strength and sustainability. You won't find any particleboard, MDF, veneer, or laminates here - even the back panel is made from responsibly-harvested American solid wood.

Hidden Fixed Wheels and Levelers

The Angle's stylish brushed nickel feet feature concealed fixed wheels to assist in moving the cabinet forward and backward for convenient equipment access from the rear. Plus, levelers adjustable from inside the cabinet make leveling on floors easier.

Dual-zone Quiet Exhaust System

Each enclosure features a thermo-controlled exhaust fan that spins at 1000 RPM, emits less than 16 dBa, yet moves nearly 40 CFM. Controllers turn fans on at ~87 F and off at ~80 F using an internal sensor or external probe at the source. Fans feature quiet, long-lasting SONY-designed fluid dynamic ball-bearings.

Vented Bottom Panel

Front air vents in the Angle's bottom allow the fans to draw cooler ground-level air into the enclosures. Removable vent grommets block "dust bunnies" and allow for easy cleaning.

Vented Tempered Adjustable Shelves

The Angle's adjustable tempered safety glass shelves allow cool air brought in by the fans to flow up and around components for maximum heat extraction. Multiple shelf positions allow for flexible component placement.

Easy-Off Removable Solid Wood Back Panel

The Angle's removable back panel provides convenient access to equipment from the rear. Thumb screws mean no tools are required and threaded inserts mean frequent access produces no wear-and-tear on the cabinet.

Dimensions (HWD - inches)

Dimensions presented as HWD (height x width x depth) in inches

Please make sure your gear fits before ordering!

• Overall Cabinet: 22 x 58 x 22
• Enclosures: (review illustration below)
  • At the widest: 18 x 19-3/4 x 16-1/4 (each)
  • At the deepest: 18 x 16-1/16 x 19-5/8 (each)
• Side Shelf Areas: 18 x 7 x 8-1/2 (each)
• Distance from wall to midpoint of back: 17-7/16"
• Distance from front corner to start of taper: 10-3/8"

TOP FOOTPRINT

HOW THE ANGLE FITS INTO A CORNER

INTERIOR FOOTPRINT OF LEFT ENCLOSURE (mirror for right side)

To illustrate how the Angle's tapered enclosures accommodate components, the above shows the footprint of one measuring 17-1/4" W by 16" D, centered horizontally and set back 1/2".

Capacities

Weight Capacities

• Total Weight: 450 lbs max
• Top Shelf: 200 lbs
• Glass Shelf: 50 lbs each
• Bottom Shelf: 85 lbs each side

Equipment Capacities

This cabinet has been designed with two components per enclosure in mind. Placing three or more components in an enclosure, while possible, may harm the cabinet and/or your equipment if excessive heat is allowed to build up inside. Make sure your components have sufficient space above for adequate airflow (at least two inches recommended; more for very hot components). Please plan accordingly and consult your electronics documentation before ordering.

Materials

Wood Parts

• Cabinetry:
  • Solid 4/4 Pennsylvania White Ash (Black and Espresso)
  • Solid 4/4 Pennsylvania Soft Maple (Cinnamon)
  • Finished Panel Thicknesses
    • Top, bottom, ends, partitions, 13/16"
    • Door frames, back panels, side shelves, 3/4"

Other Parts

• Glass:
  • Door - Tempered Safety, 1/8", seamed edge
  • Shelf - Tempered Safety, 1/4", pencil edge
• Hardware:
  • Feet - Steel, nickel plated, brushed satin finish
  • Knobs - Aluminum, nickel plated, brushed satin finish
  • Hinges - Salice 6-way adjustable cup, nickel finish
  • Wheels - 50mm diameter, fixed, polyurethane
• Finish:
  • Low VOC water-based stain
  • Conversion varnish topcoat
  • Sherwin-Williams industrial/professional
  • All surfaces finished, including backs and interiors

Shipping

This item ships via LTL Ground Truck. Delivery is by appointment and you must inspect and sign for delivery.

• Total shipping weight: 158 lbs (furniture + pallet)*
• Item weight packed in carton: 123 lbs*
• Item weight unpacked and bare: 98 lbs*
• Main carton dimensions (HWD): 26" x 61" x 24"

* Weights are approximate and based on Ash (our heaviest species); Maple units weigh slightly less. A high estimate of 50 lbs used for pallet. Doors, drawer boxes and back panels can be removed to reduce carrying weight.

Delivery Options and Rates

Rather than fold shipping into our prices and call it "free", we let you choose the service you want based on your budget and your needs.

Shipping Options and Rates

Look Up Transit Time

For more about shipping, please see our Shipping Info page.